Get Best Quote
 | Yogi Engineering Works
Vatva GIDC, Ahmedabad, Gujarat GST No. 24AKOPY6106H1ZT |
Send E-mail
Call 0804897714369% Response Rate
| Yogi Engineering Works
Vatva GIDC, Ahmedabad, Gujarat GST No. 24AKOPY6106H1ZT |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 1,500 / Piece Get Latest Price
| Minimum Order Quantity | 01 Piece |
| Material | Stainless Steel |
| Overall Length | 500 mm |
| Finishing | Polished |
| Brand | YEW |
| Industrial | Machinery |
| Steel | MS |
| Country of Origin | Made in India |
| Packaging Type | Box |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 8,500 / Piece Get Latest Price
| Material | Mild Steel |
| Overall Length | 500 mm |
| Finishing | Polished |
| Brand | YEW |
| Loading Capacity | 1.5 Ton |
| Country of Origin | Made in India |
| Packaging Type | Box |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 2,500 / Piece Get Latest Price
| Material | Stainless Steel |
| Overall Length | 900 mm |
| Finishing | Polished |
| Brand | YEW |
| Country of Origin | Made in India |
| Packaging Type | Box |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 2,500 / Piece Get Latest Price
| Material | Stainless Steel |
| Brand | YEW |
| Size | 1200 mm |
| Country of Origin | Made in India |
| Packaging Type | Box |
| Surface Finish | Polished |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 8,500 / Piece Get Latest Price
| Material | Stainless Steel |
| Brand | YEW |
| Country of Origin | Made in India |
| Surface Treatment | Polished |
| Length | 800 mm |
| Packaging Type | Box |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 15,000 / Unit Get Latest Price
| Material | Mild Steel |
| Overall Length | 500 mm |
| Finishing | Polished |
| Brand | YEW |
| Loading Capacity | 1.5 Ton |
| Country of Origin | Made in India |
| Packaging Type | Box |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 2,000 / Piece Get Latest Price
| Material | Mild Steel |
| Overall Length | 500 mm |
| Finishing | Polished |
| Brand | YEW |
| Loading Capacity | 1.5 Ton |
| Country of Origin | Made in India |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 10,500 / Piece Get Latest Price
| Minimum Order Quantity | 01 Piece |
| Material | MS, SS |
| Overall Length | 500mm To 3000mm |
| Expanding Length | 500mm To 3000mm |
| Brand | YEW |
| Outer Diameter | 76mm |
| Country of Origin | Made in India |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 6,500 / Piece Get Latest Price
| Country of Origin | Made in India |
| Surface Treatment | Polished |
| Length | 700 mm |
| Packaging Type | Box |
| Material | Mild Steel |
AirShaftTechnical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
Air Expaendable Shaft
Lug Type Air Shaft
Bottom Knife Holding Shaft
Ball Shaft
Mechanical Shaft
Mulit Blader Shaft
Short Lug Type Shaft
Leaf Type Shaft
Air-Mechnical Type Shaft
With Intern Leaves and Short Lugs Shaft
Carbon Fibre Shafts
Approx. 12,500 / Piece Get Latest Price
| Minimum Order Quantity | 01 Piece |
| Material | Stainless Steel |
| Usage/Application | Industrial |
| Brand | YEW |
| Performance | A+ |
| Roll Width | 500mm to 3000mm Standard |
| Country of Origin | Made in India |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 15,500 / Piece Get Latest Price
| Minimum Order Quantity | 01 Piece |
| Brand | YEW |
| Hardness Of Chrome Surface | SS |
| I Deal In | New Only |
| Diameter | 25mm, 76mm & 152mm |
| Grade | A+ |
| Length | 500mm to 3000mm Standard |
| Material | MS, SS |
| Country of Origin | Made in India |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 12,500 / Piece Get Latest Price
| Minimum Order Quantity | 01 Piece |
| Shape | Round |
| Material | MS & SS |
| Surface Treatment | Polished |
| Diameter | 76mm & 152mm |
| Grade | A+ |
| I Deal In | New Only |
| Country of Origin | Made in India |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Approx. 15,500 / Piece Get Latest Price
| Minimum Order Quantity | 01 Piece |
| Usage/Application | Industrial |
| Material | MS & SS |
| Size | 76mm & 152mm |
| Country of Origin | Made in India |
Air Shaft Technical Specifications:
It is capable of compensating speed variation due to gauge variation with multi-cores.
Minimum 20 mm core width is possible.
Reel holding is possible at any position across the width.
No-time lost in re-positioning cores since no distance pieces are required.
Shaft can run at very high speed.
Suitable for core ID. 3″ and 6″
Length as per Customer requirement.
Load up to 2 tons
Suitable for Core l. D. dia 3″, 4″, 6″, 8″ (metric size and special sizes also produced)
Length as required
Speed up to 1000 Mtrs/min
Suitable for core materials: Paper, Steel, Thermoplastics
Minimum core width 20 mm
Pipe – Steel
End Generals – Steel – simple or hardened
Cam – Brass
Lugs – Hardened Steel / Rubber
|
Air Expaendable Shaft |
|
Lug Type Air Shaft |
|
Bottom Knife Holding Shaft |
|
Ball Shaft |
|
Mechanical Shaft |
|
Mulit Blader Shaft |
|
Short Lug Type Shaft |
|
Leaf Type Shaft |
|
Air-Mechnical Type Shaft |
|
With Intern Leaves and Short Lugs Shaft |
|
Carbon Fibre Shafts |
Paper Cover Rewinding Machine Get Best Quote Pouch Rewinder Machine Get Best Quote Box Stretch Wrapping Machine Get Best Quote Bill Paper Slitting Machine Get Best Quote Automatic Stretch Film Roll Slitting Rewinding Machine Get Best Quote Paper Core Cutting Machine Get Best Quote